How can I Avoid Permanent Stains on my Marble Floors and Countertops?
After a certain period, marble tends to lose its shine and becomes lifeless and dull. However, this can be avoided with proper cleaning and maintenance. Just like other natural stones, marble is affected by stains. Therefore, you have to deal with them immediately, to prevent permanent damage.
Stains caused by coffee, tea, acid, and wine, can penetrate to the deeper layers. Whenever there are spills, ensure you clean them immediately. For fresh stains, sprinkle baking soda onto the affected area. This will neutralize the acid. For old stains, make a paste of baking soda with water and then spread on the stain. Allow it to sit on the stain for several minutes, and then wipe it away.
How can you repair marble using products?
Due to its delicate nature, marble can be easily damaged. The good news is that you can do it on your own, without spending thousands. Installing a marble is quite expensive and replacing it can be cost intensive. If your marble floor is chipped or cracked, the best thing to do is patch the chips and chunks. To repair a chunk, you can use specially formulated adhesive or tape. If you notice a hole in your marble tiles, the easiest thing to do is filling it. Ensure the hole is properly cleaned prior to filling. For filling, use two parts epoxy. Once the epoxy has cured, seal the spot using polyurethane.
How jk marble maintenance restores marble floors?
JK marble maintenance uses a 4-step process for marble restoration. The steps involve resurfacing the stone, chemically closing it, hardening and then polishing it. The four steps involve:
– Grinding: Also known as flattening or lippage removal, this is a very powerful step in the restoration process. It involves the removal of all roughness and ledges thus achieving uniform flatness to your marble floor. This step can also remove deep-set stains and scratches.
– Honing: This involves smoothing the marble floor, using industrial diamonds. This gives the surfaces more shine. Honing also removes stains and scratches, while giving the surface a uniform appearance. In some instances, honing is enough to restore a spectacular look and improves the aesthetics.
– Polishing: This is the 3rd step in the restoration process. Polishing can give the floor either a shine or semi-shine appearance. Just like honing, polishing is done using industrial diamonds. However, these are smaller graded. If your marble floors are in good condition, polishing can restore the shine.
– Buffing or crystallization: Crystallization is a finishing process. It gives the marble surfaces a mirror-like shine, through a chemical reaction. This process also creates a microfilm on the marble’s surface. This durable and solid film preserves the brightness and color of the marble.
What effects will topical finishes and coatings have on my marble floor?
Most people use topical finishes and coatings, to make the marble surface shiny. However, these are not a good solution to your marble floors. First, the alkalinity present in these products will discolor and dull the surface after a certain period. Secondly, they don’t allow your marble tiles to breathe effectively. This can have detrimental results to the stone. In addition, these coatings require ongoing care and maintenance. You should never us mop and spray type products for vinyl floors on marble and other natural stone floors. Using them will only increase the maintenance needs.
What is the difference between JKMM and other methods of marble maintenance?
The JKMM method is specifically designed to polish the stone, without topical films that build-up or discolor the stone. In addition, the ABC method is not as labor-intensive as waxing methods. Furthermore, it doesn’t require using strong acids. It is, therefore, clear that the JKMM method is a sustainable and cheaper solution in the long-term, thus the preferred marble maintenance method.
What are some of the common natural stones used in a building?
Due to the durability of natural stone, the benefits outweigh the costs. There are different types of natural stone using in construction. These include marble, limestone, granite, marble, slate and travertine.
– Granite: Only rubies, sapphires, and diamonds can match the hardness and durability of granite. It is the go-material when it comes to driveways, countertops, and fireplaces. Its unique swirled and scattered grain patterns can suit almost any kitchen décor. Granite is available in a wide range of textures
– Travertine: Small cavities present on the surface create flowery and cream colored patterns, lending it beauty and uniqueness. Unfilled travertine is available in delicate earth tones, for outdoor and indoor flooring, garden walkways and fireplace surrounds.
– Slate: Slate has been used in construction for many years, due to its solid resistance to freeze and thaw. This dense rock comes in green, red and purple tones. Slate is commonly used for interior flooring. It works well as a stain-resistant and durable material for countertops, shower enclosure, roof covering and building cladding.
Why is using natural stone advantageous?
If you are considering using natural stone for your floors and walls, then you are in luck. It comes with numerous advantages and benefits, which include beauty, durability, and stain resistance. Due to the extensive color selection available in natural stone, combined with the uniqueness, the possibilities are endless.
Natural stone is also scratch resistant. Nothing beats natural granite when it comes to scratch resistance. Diamond and sapphire are the only materials that are harder than natural granite when it comes to scratch resistance. Then there is the issue of heat resistance. Granite is burn resistant, with the ability to withstand temperatures of up to 1200 F. This means that if a building burns down, granite countertops will remain.
Natural stone is also worn resistant and extremely durable for use. Due to its hard natural characteristics, combined with resistance to head and scratches, nothing beats natural stone to a large extent. It is built to last. Natural stone has been used for thousands of years to construct floors, walls, and buildings. It can withstand powerful forces of damaging winds, rain, and extreme sun.